The frame is welded by double pipe profiles and special Angle connectors,
which is simple and efficient to install；
The frame is welded by double pipe profiles and special Angle connectors, which is simple and efficient to install；All components can be easily assembled and disassembled without professional training, which can solve the complex and time-consuming problem of machine room and cabinet. Reduce the cost, easy to install, enjoy better cabinet experience。
The welding structure of the cabinet can be static load up to more than 1000KGS, the cabinet solid to meet the installation requirements of equipment.
The inside structure can customize to 19inch profile or installation plate according to customer’s request. Which can meet different project.
1.The main frame is made of nine folds structure and welded by special 3-Tees. Firmed configuration, loading capacity ; 1000KGS .
2. Front door metal ，Door Thickness 2.0mm，The lower edge of the door plank is 25mm off the ground ；The inner side of the door plate is reinforced with small round holes spaced 25mm apart
It not only increases the strength of the door panels，It can also be used to install cable harness and electrical components；The way of opening the front door can be flexibly changed to open left or right according to needs；
3. Full brake gluing equipment processing，Add top, middle and bottom three points to lock，Ensure cabinets are sealed
4. The cabinet is equipped with mounting plate, which is used to install industrial control equipment. The installation plate can be moved back and forth to adjust the depth with a distance of 25 mm; angle gauges and other accessories can be installed inside the cabinet according to customer requirements;
5. The nine fold profiles are set with 25 mm mounting holes, and are equipped with round holes and square holes, which makes the internal installation and fixation of instruments and equipment very convenient;
6. The top plate, the left and right side plates, the back plate and the bottom plate are fixed with screws and fasteners, which is easy to disassemble and assemble, and is convenient for installation in the cabinet;
7. The position of the three cover plates of the bottom inlet hole can be replaced with each other, and the position can be moved freely, which is convenient to lead in the cable and open the hole for incoming wire；
8. The base is easy to disassemble ( option);
9. Can be customized according to customer requirements of various specifications and sizes, and changes in the opening；
10. Welding structure complete machine protection IP54；
11. Surface treatment: degreasing, ceramics, cleaning, electrostatic spraying;
12. Optional: Base.
Width : 600 / 800 /1000/1200mm
Depth : 400 / 500 / 600 / 800mm
Height : 1800/2000/2200mm
Material：SPCC High quality cold rolled steel plate，Double pipes profiles，The thickness of the skeleton 1.5mm, Mounting plate thickness2.5mm，Installation plate can be made of hot galvanized sheet or cold coated sheet，other 1.2~1.5mm；