1. The  cabinet is based on ES cabinet and adopts double wall design. It consists of basic cabinet, roof, back panel side plate, and base composition;

2. Double wall rear panel, double side panel, nail fixed by inside. Double wall door with three-point locking device 130° chain, closed door from the outside can not see the screw. The side panel covers the cabinet and bottom, eliminating the weakness of entering the cabinet with mandatory measures;

3. The interlayer of the inner and outer side panel (25 mm spacing) for ventilation channels, supporting the internal heat exchange of the cabinet and reducing the impact of sunlight exposure;

4. The  roof is equipped with a shelter with 25 mm high and 75 mm high. The shelter has a complete ventilation slot to ensure gas exchange;

5. The base can be sealed with a whole or three-part seal plate;

6. The cabinet can be used in the 19-inch installation structure, can also be equipped with the installation of backboard, or the root of customer requirements design;

7. Natural air cooling, the top of the cabinet can be installed AC fan, the lower sides of the air hole and with fiber cotton dust cover.

8. IP protection: IP55、EN60529/10.91;

9. It can carry on the structure design according to the customer plan expense;

10. Surface treatment: degreasing, ceramics, cleaning, electrostatic spraying;

11. Material: high-quality cold-rolled steel plates, stainless steel or magnesium-zinc plates.

Width: 600 mm

Depth: 600 / 800 / 900 / 1000 / 1100 / 1200mm

Height: 32U/37U/42U/47U

Material: High quality cold rolled steel plate, stainless steel or magnesium-zinc plate; Main body thickness 1.5 mm, others 1.2~2.0 mm;

Our standard is double-layer design, it can also be customized according to customer requirements for single-layer design, the internal can include OEM design according to customer requirements ;

Warranty :2 years

IP protection: IP55

Colors: RAL 7035( gray)

Top & base color: RAL5012( light blue)